Mitsubishi FD100-160AN1 Series Large Pneumatic Forklifts
| MITSUBISHI FD100N1 |
|
 |
| Type: I.C. Pneumatic Tire |
Mast: 3-Stage |
| Capacity: 22000 lbs |
Service Weight: 33210 lbs |
| Power: Diesel |
|
|
| General Comments: |
The Mitsubishi FD100-160AN1 pneumatic tire lift truck series provides optimum power and reliability to tackle the toughest material handling applications. Equipped with the high performance Perkins 1204E 4.4L engine, this series offers increased fuel efficiency, reduced emissions and a lower overall operating cost.
Some of the features include:
> Equipped with the Perkins 1204E engine, built to meet EPA Tier 4 interim standards.
> One-piece steer axle reduces stress on the chassis.
> Engine Protection System keeps the lift truck running at peak performance.
> Presence Detection System (PDS) activates whenever the operator does not fasten the seat belt.
> Hydrostatic steering minimizes steering effort regardless of speed.
> Fingertip controls located in the armrest provide easy operator access.
--------------------------------------------
FD100N1 - 22,000 lbs capacity
FD120N1 - 26,500 lbs capacity
FD135N1 - 30,000 lbs capacity
FD150AN1 - 33,000 lbs capacity
FD160AN1 - 36,000 lbs capacity |
 |
|
|
|
Toyota 8-Series Stand-Up Forklift
| TOYOTA 8BNCU15(18.5) |
|
 |
| Type: Stand-Up Rider Electric |
Mast: 3-Stage |
| Capacity: 3000 lbs |
Service Weight: 9165 lbs |
| Power: AC Electric |
|
|
| General Comments: |
Toyota’s 8-Series Stand-Up Rider replaces their previous 7-Series models, was built with the ultimate performance and comfort in mind, delivering improved ergonomics, reliability and durability while reducing service intervals.
Some of the features regarding the new 8-Series include:
> AC powered system offers fast response to operating commands
> Auto-position hold maintains the forklift’s position on an inclined surface for maximum control.
> Anti-stall protection cuts off power to the forklift to prevent the motor from overheating.
> Spacious operator compartment with 8" low step height.
> Universal low-effort brake pedal allows for flexible positions to increase operator productivity.
> Regenerative braking improves overall efficiency and prolongs brake component life.
--------------------------------------------
8BNCU15/16.5 - 3,000 lbs capacity
8BNCU15/18.5 - 3,000 lbs capacity
8BNCU18/16.5 - 3,500 lbs capacity
8BNCU18/18.5 - 3,500 lbs capacity
8BNCU20/18.5 - 4,000 lbs capacity
8BNCU20/21.25 - 4,000 lbs capacity |
|
|
|
|
Mitsubishi ESR-N2 Series Reach Trucks
| MITSUBISHI ESR23N2 |
|
 |
| Type: Narrow Aisle Single Reach |
Mast: 3-Stage |
| Capacity: 4500 lbs |
Service Weight: 9050 lbs |
| Power: AC Electric |
|
|
| General Comments: |
Mitsubishi lift trucks and narrow aisle products in the United States, Canada and Mexico, has introduced their new ESR-N2 series of reach trucks. The new 3,500 - 4,500 lb. capacity reach trucks offer industry-leading lift speeds combined with high capacity retention, allowing loads to be staged at higher-rack levels for greater warehouse efficiency and productivity.
Some of the features include:
> Advanced AC motor technology and exclusive Jungheinrich vehicle software that optimizes performance while minimizing energy consumption.
> The ESR-N2 series provides excellent load handling at high lift heights — reaching up to 450 inches.
> Designed with a spacious operator compartment for increased comfort and productivity.
> The operator display panel features key information in one easy-to-access location, including three programmable performance modes, a battery discharge indicator, drive wheel direction indicator and LED indicator lights.
-----------------------------------------
ESR20N2 - 4,000 lbs capacity
ESR23N2 - 4,500 lbs capacity
EDR18N2 - 3,500 lbs capacity |
|
|
|
|
Jungheinrich ETR 340A - 335DA Series of Pantograph Reach Trucks
| JUNGHEINRICH ETR 340A |
|
 |
| Type: Narrow Aisle Single Reach |
Mast: 3-Stage |
| Capacity: 4000 lbs |
Service Weight: 9050 lbs |
| Power: AC Electric |
|
|
| General Comments: |
Jungheinrich lift trucks and narrow aisle products in the United States, Canada and Mexico, has introduced their new Jungheinrich ETR 340A - 335DA series of pantograph reach trucks. The new 3,500 - 4,500 lb. capacity reach trucks offer industry-leading lift speeds combined with high capacity retention, allowing loads to be staged at higher-rack levels for greater warehouse efficiency and productivity.
Some of the features include:
> Advanced AC motor technology and exclusive Jungheinrich vehicle software that optimizes performance while minimizing energy consumption.
> The ETR series provides excellent load handling at high lift heights — reaching up to 450 inches.
> Designed with a spacious operator compartment for increased comfort and productivity.
> The operator display panel features key information in one easy-to-access location, including three programmable performance modes, a battery discharge indicator, drive wheel direction indicator and LED indicator lights.
-----------------------------------------
ETR 340A - 4,000 lbs capacity
ETR 340A - 4,500 lbs capacity
ETR 335DA - 3,500 lbs capacity |
|
|
|
|
Cat Lift Pneumatic Tire DP100-1601N Sreries
| CAT LIFT DP100N |
|
 |
| Type: I.C. Pneumatic Tire |
Mast: 3-Stage |
| Capacity: 22000 lbs |
Service Weight: 32210 lbs |
| Power: Diesel |
|
|
| General Comments: |
Built with your business in mind, the Cat DP100N-DP160N pneumatic tire lift truck series provides optimum power and reliability to tackle the toughest material handling applications. Equipped with the high performance Perkins 1204E 4.4L engine, this series offers increased fuel efficiency, reduced emissions and a lower overall operating cost.
Some of the features include:
> Equipped with the Perkins 1204E engine, built to meet EPA Tier 4 interim standards.
> One-piece steer axle reduces stress on the chassis.
> Engine Protection System keeps the lift truck running at peak performance.
> Presence Detection System (PDS) activates whenever the operator does not fasten the seat belt.
> Hydrostatic steering minimizes steering effort regardless of speed.
> Fingertip controls located in the armrest provide easy operator access.
--------------------------------------------
DP100N - 22,000 lbs capacity
DP120N - 26,500 lbs capacity
DP135N - 30,000 lbs capacity
DP150N - 33,000 lbs capacity
DP160N - 36,000 lbs capacity |
|
|
|
|
Jungheinrich ETV/ETM 3 Series Moving Mast Reach Trucks
| JUNGHEINRICH ETV 318A |
|
 |
| Type: Narrow Aisle Single Reach |
Mast: 3-Stage |
| Capacity: 3900 lbs |
Service Weight: 7765 lbs |
| Power: AC Electric |
|
|
| General Comments: |
The ETV/ETM 3 Series is one of the few sit-down moving mast reach truck series offered in North America. One of the benefits of the reach truck's unique design is that operators remain seated, allowing for enhanced comfort and reduced fatigue, especially during long shifts.
Some features include:
> Increased maximum lift heights (up to 42 feet) and higher-rated capacities (over 22 feet) allow operators to perform efficiently in more difficult high-rack applications.
> Equipped with Jungheinrich's powerful 4th generation AC technology for drive, lift and steering motors, the reach truck has the ability to operate up to two shifts on one battery charge in many applications.
> Designed with operator comfort in mind, the new moving mast reach truck series features a spacious operator compartment and wider armrest, which allows a variety of operators to comfortably drive the lift truck
> The new mast design and narrow roof allow for enhanced visibility through and around the mast.
----------------------------------------------------
ETV 318A - 3,900 lbs capacity
ETV 320A - 4,400 lbs capacity
ETV 325A - 5,500 lbs capacity
ETM 325A - 5,500 lbs capacity
|
|
|
|
|
|
|
Select Year & Quarter 
