Volvo EC200E Excavator
VOLVO EC200E |
|
|
Equipment Type: Crawler Excavator |
Power Mode: Diesel |
Operating Weight (m tons): 21.3 |
Stick Length (ft): 9.5 |
Operating Weight (lbs): 46980 |
Bucket Capacity (cy): 1.67 |
Net HP: 154 |
Track Length (ft): 14.67 |
Engine Manufacturer: Volvo |
|
|
General Comments: |
> 154 net hp Volvo diesel engine
> The ability to transport it on a trailer without additional permits, as opposed
to larger machines
> Auto idling, auto engine shutdown and ECO mode for increased fuel efficiency
> Service-friendly features like grouped filters and single-layer cooling systems
are easily accessible from ground level
> ROPS cab, high-visibility handrails, anti-slip steps and easy access to the
machine via the right-hand side
> Integrated work modes incorporate engine rpm and hydraulic flow into a
single dial, allowing operators to easily get the perfect balance of power and
controllability
> New 8-inch LCD display
> Tier 4 Final D4 Volvo engine |
|
|
|
|
Komatsu PC290LCi-11 Excavator
KOMATSU PC290LCi-11 |
|
|
Equipment Type: Crawler Excavator |
Power Mode: Diesel |
Operating Weight (m tons): 32.1 |
Stick Length (ft): 10.5 |
Operating Weight (lbs): 70702 |
Bucket Capacity (cy): 2.13 |
Net HP: 196 |
Bucket Width (in): 54 |
Engine Manufacturer: Komatsu |
Track Length (ft): 16.25 |
|
General Comments: |
> 196 net hp Komatsu diesel engine
> Intelligent Machine Control Joysticks provide a semi-auto/manual-mode
switching and design surface offset function that can be operated with
switches on the control levers
> Auto Grade Assist allows the boom to adjust bucket height automatically as
the operator moves the arm, tracing the target surface
> Auto Stop Control ensures the work equipment automatically stops when the
bucket edge reaches the design surface
> Minimum Distance Control controls the bucket by automatically selecting the
point on the bucket closest to the target surface |
|
|
|
|
Komatsu PC238USLC Excavator
KOMATSU PC238USLC-11 |
|
|
Equipment Type: Crawler Excavator |
Power Mode: Diesel |
Operating Weight (m tons): 24.6 |
Stick Length (ft): 9.58 |
Operating Weight (lbs): 54230 |
Bucket Capacity (cy): 1.11 |
Net HP: 165 |
Bucket Width (in): 36 |
Engine Manufacturer: Komatsu |
Track Length (ft): 14.58 |
|
General Comments: |
> 165 net hp Komatsu diesel engine
> Up to 4 percent greater productivity than the previous Dash 10 machine
> The machine's contoured cab profile and sliding door allows the cab to swing
within the same radius as the counterweight.
> Maintenance made easier through monitor panel improvements and machine
design that incorporates new Tier IV Final technology
> New operator ID system provides KOMTRAX data to track operators,
applications, and machine operation for up to 100 individual ID codes
> New temperature controlled viscous fan clutch reduces parasitic load on the
engine |
|
|
|
|
Komatsu GD655-7 Motor Grader
KOMATSU GD655-7 |
|
|
Equipment Type: Motor Grader |
Power Mode: Diesel |
Operating Weight (lbs): 38140 |
Moldboard Size (ft): 14 |
Net HP: 180 |
Operator Protection: EROPS |
Engine Manufacturer: Komatsu |
|
|
General Comments: |
> 180 net hp Komatsu diesel engine
> Slightly smaller but “right sized” steering wheel provides more visibility and
operator room in the cab.
> New steering lever allows the operator to keep hands on the low-effort, work
equipment levers and make small steering adjustments, while operating
without needing to turn the steering wheel
> New multi-position adjustable arm rests and LH/RH consoles have power
raise/lower and mechanical fore/aft adjustments to precisely adjust to
operator preferences.
> New, high-capacity, air-suspension seat softens in-cab machine vibrations
for operator
> New stop-at-center articulation feature simplifies operation
> New operator presence monitoring system alerts the operator if they leave the seat and controls are not locked out properly |
|
|
|
|
|
|